|

Keep your office, salon, shop, bowling center, or restaurant smoke-free with our flush/ceiling mount commercial HEPA filter systems!
The 10.0 Flushmount Air Cleaner is designed to drop into a suspended ceiling. It replaces either 1 - 2’ x 4’ tile or 2 - 2’ x 2’ tiles from the suspended ceiling. In order to install the PR10.0 flushmount easily the clearance above the suspended ceiling needs to be at least 13" and is recommended that the air cleaner is installed in areas that do not exceed a 13 foot ceiling height. The weight of the system does not rest on the ceiling grids but is secured above the suspended ceiling to a permanent structure such as a joist or beam. All filters on the 10.0 Flushmount are accessible from the louvered door and hinge door on the face of the system. 1 unit recommended for every 1000 square feet.
Our ceiling mount HEPA Filter Systems use a powerful variable speed blower to draw the air from smoke-filled areas. As the air is drawn through the high-efficiency filter media, 95% of the tobacco smoke particles are removed on each pass. The clean air that is constantly discharged into the area is refreshing and remarkably free of tobacco smoke and other contaminants. This is particularly beneficial in lounges and restaurants, because it reduces the need for segregated smoking areas. Practically all of the dust, dirt, pollen and other contaminant particles are removed from the air passing though the air cleaner. Even the microscopic airborne particles are trapped. Everyone prefers breathing air that’s been cleaned of the many pollutants that can cause discomfort and stuffiness. Plus, lowering the pollen, spores and fungi count helps reduce the problems caused by these pollutants.
Specs:
- 1200 C.F.M.
- All systems carry a lifetime motor/blower warranty
- All electrical components and fan motor are UL Listed and CSA Certified. Note: 13" Clearance above drop ceiling required.
- Install by removing ceiling tile and dropping unit in. Plug in or hard wire.
- Dimensions: Fits in 2 - 2’x2’ or 1 - 2’x4’ ceiling tile
46 1/2" L x 23 3/4" W x 12" H
- Electrical:
4.2 amps, 120 volts, Two Speed
10 ft power cord, 3 prong grounded plug
- Filters: Three Filter System: HEPA, Charcoal, Pre-Filter
1/2" Polyester Tackified Pre Filter
1/2" Activated Carbon Filter
12" deep HEPA Filter
- Weight:
85 lbs.
- CFM:
1200
- Cabinet Finish:
White
- Installation:
Suspended ceiling
Retail Price: $1,995.00
Our Price: $1,785.95
|