| |
Product |
Price |
View |
|
|
Biomaster 1 Micron Carbon Block Heavy Metal Pre-Filter
Replaceable 1 Micron Carbon Block Heavy Metal Pre-Filter for the BioMaster System |
29.95 |
View |
|
|
Biomaster 10 Micron Carbon Block Post-Filter
Replaceable 10 Micron Carbon Block Post-Filter for the Biomaster System |
15.95 |
View |
|
|
BioMaster Replaceable 5 Micron Sediment Pre-Filter
|
5.95 |
View |
|
|
BioMaster Replaceable RO Membrane
36 GPD TFC Dry 98.6% Typ. Rejection |
54.95 |
View |
|
|
Biomaster Replaceable UV-C
Replaceable UV-C Lamp 0.75 GPM Bacteriological Control |
75.95 |
View |
|
|
Gard’n Gro Prefiltration Filter
|
40.68 |
View |
|
|
Gard’n Gro Replacement Cartridge
Replacement Cartridge for the Gard’n Gro Dechlorinator |
37.82 |
View |
|
|
Waterwise 4000 Replacement Filters
For the Waterwise 4000
6 Pack |
33.95 |
View |
|
|
Waterwise 9000 Post Filter Cups 6 pack
Fits the waterwise 9000
6 pack |
39.00 |
View |
|
|
Waterwise 9000 1 Gallon Collector/Dispenser Bottle
Fits the Waterwise 9000 |
45.00 |
View |
|
Waterwise 4000 1 Gallon Glass Collector/Storage Bottle
For the waterwise 4000 |
59.00 |
View |
|
|
Throttle Valve
Chrome plated brass
Allows you to shut off water during shampoo and lathering. Can conserve 15% in water and energy costs. |
4.99 |
View |
|
|
Water Filter Chlorine Test Strips
Bottle of 50 strips |
17.95 |
View |
|
|
Regular 1M Filter Melody/Microlite/Mavello
|
59.95 |
View |
|
|
Biostone .01 hollow filter Melody/ Microlite
|
85.00 |
View |
|
|
Waterwise 8800 Post Filter Bags (6 pack)
|
25.99 |
View |
|
|
Life Tannin Filter
Suitable for use with all Jupiter Ionizers. |
79.95 |
View |
|
|
Life Tannin Filter Housing
Suitable for use in conjunction with the Ion Life Tannin Filter that can be used with all Jupiter Ionizers. |
39.95 |
View |
|
|
PF-4 Post Filter Reduction Element
PF-4 reduction elements are designed for use in conjunction with British Berkefeld and Berkey series of water filters to adsorb the following four unwanted elements most commonly found in drinking water.
MTBE (Methyl-tertiary-butyl-ether)
Fluoride
Lead
Arsenic
PF-4 filters are also designed to adsorb:
DBCP (Dibromo-chloro-propane)
THM’s (trihalomethanes)
Herbicides & Pesticides
Heavy Metal ions
Installation:
Assemble the water filter as per the water filter assembly instruction. On the underside of the upper chamber locate the stem of each ceramic filter (do not remove the wing nut holding the ceramic filter in place). With clean hands, remove blue caps and screw a PF-4 filter onto each filter stem (the blue arrow should point away from upper chamber) giving five full revolutions. Do not screw more than five revolutions as this may damage the internal media screen. When complete, seat upper chamber on top of the lower chamber. Fill upper reservoir. When the lower reservoir is full, discard the first batch of water, which may contain process dust. (Note: when lower chamber is full of water, the PF-4 filters will be immersed).
Technical Information:
MTBE: The PF-4 is manufactured to exceed ANSI/NSF Standard 53 which requires that MTBE be reduced by at least two thirds from an influent rate (water going in) of 15ppb to an effluent rate (water going out) of less than 5ppb (> 95% reduction*). LEAD: Tests have shown that when 2000 gallon of influent water at a concentration of lead of 150-200 ppb pass through 200 grams of media at a flow rate of 1gpm, the lead level was reduced to less than 1ppb (>99% reduction). FLOURIDE: Testing for fluoride was based on 20-30ppm of the ion in the influent aqueous solution at a flow rate of no more than 3 gpm per cubic foot of media. Results of < 1ppm of the fluoride ion in the effluent were typical for the media (>95% reduction). Under optimum conditions, effluent concentrations of less than 50 ppb were readily achieved (>99.75% reduction).
Replacement:
Under normal conditions it is recommended that PF-4 elements be replaced at six-month intervals ( Actual capacity is dependent on the presence of other competing contaminants in the source water. High levels of total organic carbons, volatile organic compounds or certain inorganic minerals may reduce the capacity and efficiency of these elements. )*. Note: do not boil this element.
MTBE (Methyl-tertiary-butyl-ether) is the most common oxygenated fuel additive used in reformulated gasoline. Contamination of groundwater with MTBE is a rapidly growing problem in 49 U.S. states. In drinking water, even trace amounts of MTBE can cause taste and odor problems, which may lead to nausea and dizziness. The potential long-term health effects of MTBE are not understood at this time, however, initial studies indicate MTBE may cause kidney and liver problems. MTBE removal from water is a challenge because it is very soluble in water and must compete with other organics for binding sites on the filter medium. These other contaminants (BTEX - and TOC - total organic carbons) are adsorbed more readily, and MTBE often slips by standard carbon filters, ending up in the filtered water. The PF-4 filter has been specifically designed to remove MTBE from drinking water when used in conjunction with a British Berkefeld gravity filter system. The media within the Super Sterasyl filters, in the upper chamber, capture the more strongly adsorbed BTEX and TOC's. This permits the downstream PF-4, secured as a post filter, to more efficiently remove MTBE.
Length: 6”
Width: 2.5”
Color: White
Replacement: 6 Months |
79.95 |
View |
|
|
Biontech 3000 - Electrodes
The Biontech 3000 electrodes can be placed in vinegar once a month for 4 hours and they will last years. |
94.00 |
View |
|
|
Biontech 3000 - Replacement membrane
The replacement membranes need replacement every 3000 liters ( but note that you can put the membrane in vinegar once a month for 4 hours and they will last years). |
69.00 |
View |
|
Waterwise Kleenwise Descaler
Kleenwise is a boiler descaler made specifically for removing mineral and other deposits from water distillers to keep them in top energy efficient operating condition. Phosphate free and biodegradable. This 40 oz. container is about a one year supply. |
19.00 |
View |
|
|
pH Miracle Faucet Filter - Single
|
79.00 |
View |
|
|
pH Miracle Faucet Filter - Tripack
|
236.10 |
View |
|
|
Eagle Spring Undersink Replacement Cartridge Model 1177
The Model 1177 GAC replacement cartridge is similar to our Model 2077, but is only designed to last for 6-months. It can be used all the under-sink units except the Model 2050. |
37.00 |
View |
|
|
Eagle Spring Undersink System Replacement Cartridge Model 2077
The Model 2077 is the 3 year replacement cartridge for Models 2003, 2020, 2025, 2030 and the old Model 2060. |
105.00 |
View |
|
|
Eagle Spring Replacement Cartridge Model 1015
The Model 1015 is our string wound sediment cartridge. These units are sold in pairs and are used in our Model 2020 and Model 2300 systems. |
22.00 |
View |
|
|
Eagle Spring Replacement Cartridge Model 1025
The Model 1025 is the replacement post filter on our Model 2300 Whole House System. This unit is sold in pairs. |
22.00 |
View |
|
|
Eagle Spring Replacement Cartridge Model 13011
The Model 13011 is the microbial carbon block cartridge used in the Model 2025. |
56.00 |
View |
|
|
Eagle Spring Replacement Cartridge Model 1405
The Model 1405 is the replacement post filter for our Model 2501 and 2901 Whole House systems. This is a 5 micron string wound sediment cartridge. |
22.00 |
View |
|
|
Eagle Spring Replacement Cartridge Model 1425
The Model 1425 is the replacement pre-filter for our Model 2501 and 2901 Whole House Systems. These cartridges are a 25 micron string wound sediment cartridge and are sold in packs of 1. |
22.00 |
View |
|
|
Eagle Spring Pleated Jumbo Cartridge 25 Micron Model 1435
The Model 1435 is the replacement pre-filter for our Model 2501 and 2901 Whole House Systems. These cartridges are a 25 micron pleated sediment cartridge. |
45.00 |
View |
|
|
Eagle Spring Pleated Jumbo Cartridge 5 Micron Model 1430
The Model 1430 is the replacement post filter for our Model 2501 and 2901 Whole House systems. This is a 5 micron pleated sediment cartridge. |
45.00 |
View |
|
|
